ItaliaAuto

by **DeaDLocK** » Fri Sep 16, 2011 6:28 pm

invisibleghost wrote:

Ok this design can be done if can get 15 sets. Rm2500 a set include bolts. Start ordering

For real? I'm in! (As long as it clears Brembos without spacers)

1. Deadlock
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

by **stereotypical** » Fri Sep 16, 2011 6:30 pm

Me in too!!

1. Deadlock
2. Stereotypical
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

by **invisibleghost** » Fri Sep 16, 2011 7:00 pm

Min 15 sets rm2500 including bolts

by **ognam** » Fri Sep 16, 2011 7:55 pm

Me in too!!

1. Deadlock
2. Stereotypical
3. ognam
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

by **nahar** » Fri Sep 16, 2011 8:56 pm

this design suit perfectly to coupe design... and if you got this.. from far people see Ferrari Modena 360.. and of course.. when closeup.. its a fiat coupe!!

by **farmer** » Fri Sep 16, 2011 9:05 pm

My friend also want...

1. Deadlock
2. Stereotypical
3. ognam
4. farmer's friend
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

by **macdude** » Fri Sep 16, 2011 9:33 pm

Can't see the photo?

by **ognam** » Fri Sep 16, 2011 9:58 pm

For the benefit of non-imageshack users:

by **wajakemek** » Fri Sep 16, 2011 10:59 pm

I oso want!

1. Deadlock
2. Stereotypical
3. ognam
4. farmer's friend
5. wajakemek
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

by **joe_yong** » Fri Sep 16, 2011 11:02 pm

whoa, ognam into rim changing hobby?! haha kaler the same as in the pic?

by **ognam** » Fri Sep 16, 2011 11:05 pm

joe_yong wrote:whoa, ognam into rim changing hobby?! haha kaler the same as in the pic?

I actually really wanted this one at first, but the Advan replicas came into availability first. If this one works out, I'll have three sets including the Azev A. :mrgreen:

by **wajakemek** » Fri Sep 16, 2011 11:07 pm

So you can change your rims like, what was it... your boxers?

:shock:

by **DeaDLocK** » Fri Sep 16, 2011 11:12 pm

Maybe his boxers cost more than his rims haha

by **macdude** » Fri Sep 16, 2011 11:16 pm

How have these rims been in terms of holding up against our road usage? Do they dent easily?

by **invisibleghost** » Sat Sep 17, 2011 9:42 am

macdude wrote:How have these rims been in terms of holding up against our road usage? Do they dent easily?

so far so good, these rims are made by Yhi. Same manufacturers as advanti

by **azdi** » Sat Sep 17, 2011 11:09 am

Ognam.... ko beli my rims sekali make it four then I bought this new design.. Ok? #-o

by **gtfan** » Sat Sep 17, 2011 8:11 pm

1. Deadlock
2. Stereotypical
3. ognam
4. farmer's friend
5. wajakemek
6. Gtfan
7.
8.
9.
10.
11.
12.
13.
14.
15.

by **gtfan** » Sat Sep 17, 2011 8:13 pm

Yes this is the design i have been waiting for. Terukla you guys. Make me spend [-(

by **raitag** » Sat Sep 17, 2011 9:38 pm

what is the width? 7 or 7.5? ET=35 or 28? nice.. very nice...

FYI, ASSO Partire rims for coupe are 17"x7.5JxET35mm.... if leon wants to pinjam as sample, can... 1 free set for me OK? :mrgreen:

by **nahar** » Sat Sep 17, 2011 10:14 pm

gtfan wrote:Yes this is the design i have been waiting for. Terukla you guys. Make me spend

i just wonder why everybody keep quiet only... going for the advan design... hahahaha

hope shouldnt be long to complete 15 set!

by **ognam** » Sun Sep 18, 2011 12:03 am

Who's in charge of this? Raitag can give 17 x 7.5 sample. I can give 17 x 8 sample. :mrgreen:

by **invisibleghost** » Sun Sep 18, 2011 12:42 am

is 17 X 7, just like before

by **Redd** » Sun Sep 18, 2011 1:14 am

shit that's lovely! can they do 18x8 ET55 PCD114.3?

redd

by **DeaDLocK** » Sun Sep 18, 2011 1:33 am

Dunno if it's feasible, but it's possible a few of the UK folks might want in on this? Not sure if the costs justify it for them though.

by **ognam** » Sun Sep 18, 2011 1:57 am

DeaDLocK wrote:Dunno if it's feasible, but it's possible a few of the UK folks might want in on this? Not sure if the costs justify it for them though.

Their 17 x 7 Team Dynamics cost around 500 quid. 17 x 7.5 around 800. Technically these are around 500 without shipping. You'll never know. It just might appeal to them.

azdi wrote:Ognam.... ko beli my rims sekali make it four then I bought this new design.. Ok?

Sorry. Bentuk macam lebih kurang je. Kalau nak swap dengan Azev boleh? Hehe.

DeaDLocK wrote:Maybe his boxers cost more than his rims haha

Only the finest silk wey... Well, no. Not really.

by **invisibleghost** » Sun Sep 18, 2011 10:41 pm

Come on, just 9 more to go

by **raitag** » Mon Sep 19, 2011 8:18 am

IG, u have not replied me... 7.5JJ/ET35 can do or not?

by **invisibleghost** » Mon Sep 19, 2011 9:14 am

raitag wrote:IG, u have not replied me... 7.5JJ/ET35 can do or not?

will stick to 7 x 17 as before.

by **ognam** » Mon Sep 19, 2011 9:15 am

C'mon. Be adventurous. Hehe.

by **raitag** » Mon Sep 19, 2011 10:34 am

same offset as before? ET28?

by **farmer** » Mon Sep 19, 2011 11:51 am

invisibleghost wrote:
raitag wrote:IG, u have not replied me... 7.5JJ/ET35 can do or not?

will stick to 7 x 17 as before.

Hantu, don't be lazy la. Tell Leon don't be lazy too. Afterall, factory is the one doing ma. Not far, in Seremban only what. 8-)

by **nahar** » Mon Sep 19, 2011 11:59 am

farmer wrote:
invisibleghost wrote:
raitag wrote:IG, u have not replied me... 7.5JJ/ET35 can do or not?

will stick to 7 x 17 as before.

Hantu, don't be lazy la. Tell Leon don't be lazy too. Afterall, factory is the one doing ma. Not far, in Seremban only what.

good one!

after all this is the new design...

why dont go for 7.5"

by **ognam** » Mon Sep 19, 2011 12:03 pm

Who stays near Quicksave who can persuade Leon? Deadlock?

by **Pangmy3** » Mon Sep 19, 2011 2:59 pm

invisibleghost wrote:
macdude wrote:How have these rims been in terms of holding up against our road usage? Do they dent easily?

so far so good, these rims are made by Yhi. Same manufacturers as advanti

what the mean made by Yhi??

by **invisibleghost** » Mon Sep 19, 2011 3:09 pm

guys, let go back to why we did the group buy in the 1st place.
we wanted rims that can fit standard coop n clear the brembo without any alien material like spacers, whobble nuts, etc and not scrubing at full turn.

so, quicksave's solution is to use existing model and just amend the lugs n offset.

in the 1st batch, we compromised on the scrubing as we do not want stagger off set. the 1st batch was call off twice due to many of the issues. you can refer to the old thread. YHI would make 10 sets and we only take 5 sets. the balance 5 they wanted for some market survey. the pioneer members were me, gtfan n pistole. there was even a letter for the 1st batch (pistole idea, hahahaahha).
we grabbed all the 10 sets + 2 more sets(iirc).

then came 2nd batch, all 12 sets, iirc, were grabbed within 2 weeks as the 1st batch was the moving testimonials. no 1 asks abt the letter.

if not quicksave or yhi does not want to do 7.5 of watever size, the mould is already standard 17x7. they just amend the lugs n off set. to use a new mould will need a minimum of 3,000 pieces just to ROI, i m sure you don't want all coops in msia to have the same design.

back to offset, if possible YHI will use the prev offset, can remember which 1. if cant, they will have to remeasure again with my car as sample. (stock mah). if u mod ur calipers, etc and cant fit, you are on ur own.

please remember all the 15 sets will be EXACTLY the same. color, etc.

remember the objective is to get a set of rims that can fit stand coop without spacer, etc at a decent price.

i remember outbreak has a set of off-the-shelf rims that he bought over from the UK but costs abt 6k++

and the factory is in taiwan. last time, there was 1 taiwanese engineer who came to measure my car

by **invisibleghost** » Mon Sep 19, 2011 3:11 pm

Pangmy3 wrote:
invisibleghost wrote:
macdude wrote:How have these rims been in terms of holding up against our road usage? Do they dent easily?

so far so good, these rims are made by Yhi. Same manufacturers as advanti

what the mean made by Yhi??

http://www.yhimalaysia.com/

by **dragon** » Mon Sep 19, 2011 3:15 pm

gtfan wrote:1. Deadlock
2. Stereotypical
3. ognam
4. farmer's friend
5. wajakemek
6. Gtfan
7.dragon-finally there comes a good design
8.
9.
10.
11.
12.
13.
14.
15.

by **DeaDLocK** » Mon Sep 19, 2011 4:07 pm

Guys, I don't have a clue on offset or width or ET numbers or anything like that. Total n00b when it comes to wheels. All I know is that if it...

1) bolts on direct without scrubbing at full lock
2) clears the Brembos
3) Is not going to buckle after hitting a small ridge
4) looks good
5) priced well

...I am in.

Happy to go to Seremban (??) to do whatever and talk to whoever, but based in IG's post I'm not sure if there's any point.

by **ognam** » Mon Sep 19, 2011 4:19 pm

I'm using the first batch. No complaints whatsoever. Having 7.5j would've been nice, but since the mould is 7j, IG is right. Really not much can be done for such a puny order. Whatever it is, my name is still on the list.

IG, Leon confirmed that this spoke design can clear the calipers? Thanks for your (once-again) effort. Sign up for one also laa.. :mrgreen:

by **RASS** » Tue Sep 20, 2011 1:43 pm

Hmmm I've been waiting for this kind of design for along time :thumbs:

. Count me in.

1. Deadlock
2. Stereotypical
3. ognam
4. farmer's friend
5. wajakemek
6. Gtfan
7.dragon-finally there comes a good design
8. Rass
9.
10.
11.
12.
13.
14.
15.

by **DeaDLocK** » Tue Sep 20, 2011 2:35 pm

Yes - more than halfway there!!!

by **kvinlim** » Tue Sep 20, 2011 8:58 pm

Damn, who want to buy my 147! I like this rims!!

by **mattng** » Tue Sep 20, 2011 11:19 pm

wow ni rim memang chun...

by **ognam** » Wed Sep 21, 2011 1:13 am

mattng wrote:wow ni rim memang chun...

Still have your coupe sir? Come join in the fun. You know you want to. Search your feelings. You know it to be true.

(yeah I just tried to bait you with a Star Wars quote)

by **SanjayF1** » Wed Sep 21, 2011 6:47 pm

RASS wrote:Hmmm I've been waiting for this kind of design for along time . Count me in.

1. Deadlock
2. Stereotypical
3. ognam
4. farmer's friend
5. wajakemek
6. Gtfan
7.dragon-finally there comes a good design
8. Rass
9. Sanjay
10.
11.
12.
13.
14.
15.

by **mattng** » Fri Sep 23, 2011 5:58 pm

ognam wrote:
mattng wrote:wow ni rim memang chun...

Still have your coupe sir? Come join in the fun. You know you want to. Search your feelings. You know it to be true.

(yeah I just tried to bait you with a Star Wars quote)

the rims are very nice, but i have not been driving my Coupe regularly for the last 12 months, clocking barely 500km in a month..

by **DeaDLocK** » Fri Sep 23, 2011 6:12 pm

Then fit the nice rims and drive it more la. Why so hard? :dunno:

by **mattng** » Fri Sep 23, 2011 6:24 pm

i have another 3 other bitches to ride..

by **mattng** » Fri Sep 23, 2011 6:24 pm

i have another 3 other bitches to ride..

by **nahar** » Fri Sep 23, 2011 8:21 pm

wow.. 5 sets to complete!!

ItaliaAuto

Who is online